WRS32+ Cascade Water Recycle System 8 GPM

The WRS 32 Recycle System is an automatic system designed to process dirty, oily wash water for reuse in washing operations. It transfers water from a collection point to a treatment unit where reagents are added to eliminate bacteria, neutralize pH, and remove pollutants like oil and grease. These reagents, similar to those in drinking water treatments, enhance water quality and safety for workers.

The system can treat up to 8 gpm (12000 gpd), suitable for most washing tasks. The unit is userfriendly, with features like automatic priming valves and a builtin water storage tank. It's pre-assembled and easily plugs into a 15 amp, 115volt outlet.

The treated water is pressurized and suitable for feeding remotely located pressure washers, ensuring its durable and reliable operation due to premium components and construction.

Specifications:

Flow and Capacity:

• Rated flow: Up to 8 GPM (12000 GPD)
• Make-up water: 100 psi maximum pressure. Automatically added as required by application.

  
Recycle Tank Capacities:

• Coagulant tank: 120 gallons
• Separator tank: 120 gallons
• Storage tank: 120 gallons
• Total water capacity: 360 gallons

Electrical:

• Electrical requirement: 115 VAC, 60 Hz, 1 phase, 15 amp total.

Pumps and Motors:

• Recycle feed pump: 
  •   Self-priming centrifugal cast iron pump
  •   1/2 HP thermally protected motor
  •   Mounted on machine base
  •   Controlled by float switch in collection pit
  •   Suction line strainer and foot valve provided
• Discharge pump: 
  •   High head centrifugal pump with 1/2 HP thermally protected motor
  •   Provides pressurized water flow to pressure washer and other uses
• Reagent metering pumps: High head centrifugal pump with 1/2 HP thermally protected motor

Filtration and Straining

• Inlet strainer: Large size with stainless steel screen in corrosion-resistant plastic housing.
• Filter system:
  •   Two 20" long 20-micron filter cartridges for final polishing
  •   Two sets included
• Sludge collection system:
  •   Three large, disposable fabric socks collect sludge
  •   Two sets included with machine

Construction and Materials:

• Recycle construction:
  •   Heavy-duty polypropylene tank with unitized construction
  •   Schedule 80 PVC pipe used throughout
  •   Heavy steel base assembly

Connection Sizes:

• Machine inlet: 1 1/2 MNPT
• Treated water outlet: 3/4 FNPT
• Drain line: 1 FNPT
• Make-up water: 1/2 FNPT

Dimensions and Weight:

• Overall dimensions: 7 ft 6 in long, 3 ft 2 in deep, 4 ft 3 in tall
• Shipping Weight: 800 pounds

Options:

•   Second pH adjusting pump.
•   Additional treated water storage capacity.
•   Sand filter final polishing system.
•   Activated carbon water polishing systems.
•   Ozone treatment.
•   Pre-treatment systems, oil skimmers, and oily water separators.